Shop&Mill » Machines
AMD 5xPro+
| Country of Origin | Turkey / Türkiye |
| Axis Motor Technology | Absulute Servo Motor |
| Control System | AlfaTech |
| Operating System | Linux |
| Block Holder Type | C holder / C Tutucu |
| Ball Screw Precision | 5µm |
| Axis carrier System | Lineer Rail /Doğrusal ray |
| Spindle Speed | 60.000RPM |
| Rated Spindle Power | 2.3Kw |
| Number of Axis | 5 Axis |
| Axis Movements | 210 x 120 x 110 |
| A Axis Angle | +/- 360 |
| B axis Angle | +92 / -30 |
| Max. Tilt Angle | ±30 Degree |
| Tool Length sensor | Induktive Sensor |
| Tool Station | 20 |
| Shank Diameter | 6mm |
| Touch Prob System | Yes (0,002) |
| AutoCabinWash | Yes |
| Dry Milling | Yes |
| Wet Milling | Yes |
| Home Position | No/hayır (Continue where you left of-Son bırakılır yerden devam eder) |
| Screen . 10’’ | Touch Screen / Dokunmatik Ekran |
| File Transfer | WİFİ , Network , USB |
| CAM Software | Open System / Açık sistem (suggested / ÖnerilenMillbox ,Hyperdent) |
| Operating Noise | 70db |
| Voltage-Frequency | 110v-230v / 50-60Hz |
| Power Consumptions | Approximatelly / Ortalama 500W |
| Air Requirement | 250 (Lt / Min.) |
| Compressed Air Pressure | 6-8 Bar |
| İnner Volume (m3) | 0,25555 |
| Dimensions | 60 x 70 x 80 |
| Weight | 400 (Kg) |
